Mac mini 2012 dual boot ubuntu

Installation Guide for Linux Mint 17 / Ubuntu 14 04 on Mac mini late Make a bootable USB of Ubuntu or Mint 17 (Qiana), you can easily do If you have a dual monitor setup, they you will notice that sometimes one of Mint / Ubuntu on Apple Mac mini (late ) | The Red–black tree says.
Table of contents

Note that you can install rEFIt on a USB stick and boot from that, which is especially useful if your goal is to have just Debian on the system as it simplifies partitioning. I was able to resolve it by using the resolution package. Debian 4. With the mid macmini 3,1 model, you need a "testing" installer to get a recent enough kernel for reboot to work with kernels from lenny and prior a hard power-off is needed after shutdown. Use regular install disks. This works perfectly for normal use and the rEFInd appears to recognise boot disks in it.

Eventually I made some progress by using the step given above to convert a debian netinst 8. I installed rEFInd with the default refine-install script. So I powered off and on again. I then booted the machine and selected the USB drive fallback boot option. Oddly this appeared to boot but then started using the DVD as well to read some files. I suspect the boot sequence gets confused about which devices it needs to read from, and having the same image in two places satisfied it. The debian install is now progressing.

Wiki Login. Hosting provided by Metropolitan Area Network Darmstadt. Translation s : none. Apparently, all the skins are not compatible with this addon, so I installed Titan which is, and which is also good looking. So when I boot the Mac, it automatically starts Ubuntu, which automatically starts Kodi. And with the Apple Remote working, everything will be perfect!

I hope to avoid you some trouble and hours of research and tweaking. In retrospect, it is quite easy. We will install Lirc Linux Infrared Remote Control , to decode infra-red signals coming from the remote. Then, we will create a Lircmap. But, most important first, we will tell X11 to ignore inputs coming from the remote. Indeed, by default, the remote is considered a keyboard. Even before installing Lirc, some buttons should work, for instance volume up and down will indeed control volume in Ubuntu.

In my case, pushing volume down in Kodi moved the selection multiple times down, and also decreased the volume. Pushing the left rewind button on the remote also triggered a lot of inputs, going left multiple times, opening the options menu, … It was really not useable, and I lost a lot of times trying to fine tune the Lirc configuration file and the Lircmap. Enough talking:. I think I selected Mac mini something from the configuration screen.

But that is not really important as we will replace the configuration file. That comes from what I chose during the installation, if yours is different, edit the file specified here!

Triple Booting

By default, it connects to the lircd socket, so if you press buttons on the remote it should output some data:. That confirms that Lirc is correctly configured.

The last step is to map the commands from Lirc to commands that Kodi understands. To do so, create a file in your home directory:. The content of my Lircmap. The tag names are Kodi commands, and the value should match the codes defined in Lirc configuration file. You can still open the menu by going left in Titan theme at least. I nooped the volumeplus and volumeminus, meaning my remote will not trigger any volume change.

I find the default Unity theme neither beautiful nor ugly.

The Problem

But I decided to test other themes, and I liked the Numix theme most. Of course, OSX on the Mac mini is a great experience overall. As the hardware ages out, performances suffer a bit. Ubuntu tends to be more snappy. The rest is a matter of personal taste. You might want to use the desktop installer. These instructions should work for either. Please leave a comment below if there are any discrepancies. The grey screen of the bootloader might stay there for a while perhaps 30s to a minute before it loads the available boot options.

You should see the following options:. The desktop installer might not show you this; you might instead see a prettier menu with the option to Try Ubuntu or Install Ubuntu. In either case, select the Install option. You can breeze through the first few steps of the installer, the ones that just configure the installer environment and basic setup.

MacMiniIntel - Debian Wiki

However, you should stop when you get to partitioning. Around this point, you should be expecting to see the partitioning menu. This is where it can get a bit tricky. As far as I can tell, you should actually be able to let this step go as per the defaults too. I got to a screen titled Partition disks , which presented me with these options:. I selected Guided - use entire disk. When asked which disk I wanted to partition, I selected the only one available:.

Yours might be different, but it should be obvious which it is. Incidentally, this might be a good point to note down whether the installer sees your disk as sda or some other sdX. This is the important thing: at the end of this step, there must be a partition that is listed as EFIboot. As long as that exists, you should be fine to continue. Because I was doing this over and over again, I occasionally encountered a problem where the installer would be unable to format the EFIboot partition. If this happens, try zeroing the drive and start over.

  1. How to Install Ubuntu and Dual-Boot macOS?
  2. cvs photo app for mac.
  3. Intel_iMac - Community Help Wiki.

You may now proceed with the rest of the installation as usual. If you insert the installer USB now, it should boot. If not, try holding the power button to force the power off, and then follow the USB booting instructions to bring it up. For the server installer, it should just come up automatically.

Ubuntu on a Mac Mini

To be absolutely clear, for both the server and the desktop installer, you want to bring up a menu that looks like this:. Now you should be looking at a GRUB console:. The result from the last step has two parts: hdX,gptY. I found that the only way to boot properly was to use the UUID of the drive ie.

The GRUB console can do tab completion, so if you just type out the vmlinuz part and hit tab , then hit. But do make sure the. And yes, you will have to type out that whole UUID.

Popular Topics

So why is the system unbootable? It also expects certain files to be present. Fire up a command line and enter:.

  1. barbie loves mac free samples!
  2. pro tools se for mac download;
  3. Your Answer!
  4. monogram embroidery software for mac?
  5. Installation of Ubuntu on Mac Mini.
  6. hinh anh sieu mau nam mac quan lot.

Press enter to add the PPA.